Page images
PDF
EPUB

labour to manage them, is all that is necessary for the transit | riveted and tested, so as to form a storage tank. From this tank and combustion of petroleum fuel; and it is certain that even in England will be found places which, from topographical and other circumstances, will use petroleum more economically than coal as fuel for manufacturing purposes under reasonable conditions of price for the fuel.

[merged small][ocr errors][ocr errors][merged small][merged small][ocr errors][merged small]

FIG. 2.-Rusden and Eeles Burner. the case of oil than coal, and for this reason, among others, the practical evaporative results are proportionately higher with liquid fuel. In some cases the work done in a steam-engine by 2 tons of coal has been performed by 1 ton of oil fuel, but in others the proportions have been as 3 to 2, and these latter can be safely relied on in practice as a minimum. This saving, combined with the savings of labour and transit already explained, will in the near future make the use of liquid fuel compulsory, except in places so near to coal-fields that the cost of coal becomes sufficiently low to counterbalance the savings in weight of fuel consumed and in labour in handling it. In some locomotives on the Great Eastern railway the consumption of oil and coal for the same development of horse-power was as 17 lb oil is to 35 lb coal; all, however, did not realize so high a result.

The mechanical apparatus for applying petroleum to steamraising in locomotives is very simple. The space in the tender usually occupied by coal is closed up by steel-plating closely

[ocr errors][merged small][ocr errors][merged small][merged small][merged small][merged small]

Liquid fuel la locomotives.

a feed-pipe is led to a burner of the combined steam-and-oil type already indicated, and this burner is so arranged as to enter a short distance inside the furnace mouth. The ordinary fire-bars are covered with a thin layer of coal, which starts the ignition in the first place, and the whole apparatus is ready for work. The burner best adapted for locomotive practice is the Holden Burner (fig. 1), which was used on the Great Eastern railway. The steam-pipe is connected at A, the oil-pipe at B, and the hand

N

wheels C and D are for the adjustment of the internal orifices according to the rate of combustion required. The nozzle E is directed towards the furnace, and the external ring FF, supplied by the small pipe G and the by-pass valve H, projects a series of steam jets into the furnace, independent of the injections of atomized fuel, and so induces an artificial inrush of air for the promotion of combustion. This type of burner has also been tried on stationary boilers and on board ship. It works well, although the great consumption of steam by the supplementary ring is a difficulty at sea, where the water lost by the consumption of steam cannot easily he made up.

Although the application of the new fuel for land and locomotive boilers has already been large, the practice at sea has been far more extensive. The reason at sea. Liquid fuel is chiefly to be found in the fact that although the sources of supply are at a distance from Great Britain, yet they are in countries to whose neighbourhood British steamships regularly trade, and in which British naval squadrons are regularly stationed, so that the advantages of adopting liquid fuel have been more immediate and the economy more direct. The certainty of continuous supply of the fuel and the wide distribution of storage stations have so altered the conditions that the general adoption of the new fuel for marine purposes becomes a matter of urgency for the statesman, the merchant and the engineer. None of these can afford to neglect the new conditions, lest they be noted and acted upon by their competitors. Storage for supply now exists at a number of sea ports. London, Barrow, Southampton, Amsterdam, Copenhagen, New Orleans, Savannah, New York, Philadelphia, Singapore, Hong Kong, Madras, Colombo, Suez, Hamburg, Port Arthur, Rangoon, Calcutta, Bombay, Alexandria, Bangkok, Saigon, Penang, Batavia, Surabaya, Amoy, Swatow, Fuchow, Shanghai, Hankow, Sydney, Melbourne, Adelaide, Zanzibar, Mombasa, Yokohama, Kobe and Nagasaki; also in South African and South American ports.

The British admiralty have undertaken experiments with liquid fuel at sea, and at the same time investigations of the

[merged small][merged small][merged small][merged small][merged small][merged small][ocr errors]
[ocr errors][merged small][merged small][merged small][ocr errors][merged small][merged small][merged small][ocr errors]
[ocr errors][ocr errors][ocr errors][subsumed][subsumed][subsumed][ocr errors][ocr errors][ocr errors]

efficiency based on the thickest armour, the heaviest and most numerous guns, the highest maximum speed, and, last and not least, the greatest range of effective action based upon the maximum supplies of fuel, provisions and other consumable stores that the ship can carry. Now, if by changing the type of fuel it be possible to reduce its weight by 30%, and to abolish the stokers, who are usually more than half the ship's company, the weight saved will be represented not merely by the fuel, but by the consumable stores otherwise necessary for the stokers. Conversely, the radius of effective action of the ship will be doubled as regards consumable stores if the crew be halved, and will be increased by 50% if the same weight of fuel be carried in the form of liquid instead of coal. In space the gain by using oil fuel is still greater, and 36 cubic feet of oil as stored are equal in practical calorific value to 67 cubic feet of coal according to the allowance usual for ship's bunkering. On the other hand, coal has to been relied upon, when placed in the side bunkers of Hit vshe obedyo unarmoured ships, as a protection against shot and 69 shell, and this advantage, if it really exists, could not be claimed in regard to liquid fuel.udmoo omul lo

[graphic]
[ocr errors]
[ocr errors]
[ocr errors]
[ocr errors]

sto MoT Buteo careful management, there is no smoke. The
great drawback, however, to the use of liquid
fuel in fast small vessels is the confined space
allotted to the boilers, such confinement being
unavoidable in view of the high power con-
centrated in a small hull. The British ad-
miralty's experiments, however, have gone far
to solve the problem, and the quantity of oil
which can be consumed by forced draught in
confined boilers now more nearly equals the
quantity of coal consumed under similar con-
nigin of ditions. All recent vessels built for the British
The
navy are so constructed that the spaces between
lon in connected their double bottoms are oil-tight and capable
of storing liquid fuel in the tanks so formed. Most recent battle-
ships and cruisers have also liquid fuel furnace fittings, and in
1910 it already appeared probable that the use of oil fuel in war-
ships would rapidly develop.

[ocr errors]

FIG. 6.-Details of Exterior Elongation of Furnace, Meyer System. or decrease may be considered almost a negligible quantity. The desideratum in a warship is to obtain the greatest fighting

In view of recent accusations of insufficiency of coal storage in foreign naval depots, by reason of the allegation that coal so stored quickly perishes, it is interesting to note that liquid fuel may be stored in tanks for an indefinite time without any important deterioration whatever

In the case of merchant steamers large progress has also been made. The Shell Transport and Trading Company have twentyone vessels successfully navigating in all parts of the Advan world and using liquid fuel. The Hamburg-American tages in Steamship Company have four large vessels similarly merchant fitted for oil fuel, which, however, differ in furnace ships. arrangements, as will be hereafter described, although using coal when the fluctuation of the market renders that the more economical fuel. One of the large American transatlantic lines is adopting liquid fuel, and French, German, Danish and American mercantile vessels are also beginning to use it in considerable amounts.

In the case of very large passenger steamers, such as those of 20 knots and upwards in the Atlantic trade, the saving in cost of fuel is trifling compared with the advantage arising from the greater weight and space available for freight. Adopting a basis of 3 to 2 as between coal consumption and oil consumption, there is an increase of 1000 tons of dead weight cargo in even a

[ocr errors]
[ocr errors][ocr errors][merged small][subsumed][subsumed][subsumed][ocr errors]
[ocr errors]
[ocr errors]
[ocr errors]
[ocr errors][subsumed][subsumed][subsumed]
[ocr errors]
[ocr errors]
[ocr errors][subsumed]

bas,ho ad topi

[ocr errors][ocr errors][ocr errors][ocr errors][subsumed][subsumed]
[ocr errors]

ships, whilst considerable additional speed is obtainable. The cost of the installation, however, is very considerable, as it includes not only burners and pipes for the furnaces, but also the construction of oil-tight tanks, with pumps and numerous valves and pipe connexions.

Fig. 2 shows a burner of Rusden and Eeles patent as generally used on board ships' for the purpose of injecting the oil. A is a movable cap holding the packing B, which renders the annular spindle M oil and steam tight. E is the outer casing containing the steam jacket from which the steam, after being fed through the steam-supply pipe G, passes into the annular space surrounding the spindle P. It will be seen that if the spindle P be travelled inwards by turning the handle N, the orifice at the nozzle RR will be opened so as to allow the steam to flow out radially. If at the same time the annular spindle M be drawn which passes through the supply pipe F will inwards by revolving the handle L, the oil also have emission at RR, and, coming in contact with the outflowing steam, will be acoor as no noitellamal-porgere the wate

[graphic]

bri FIG. 7.-Furnace on ss." Ferdinand Laeisz." A, it is proposed to do away with this ring of brickwork as being useless; B, it is proposed to fill this space up, thus continuing lining of furnace to combustion chamber, and also to fit protection bricks in way of saddle plate.

[graphic]
[ocr errors]
[ocr errors]

Buirhead Bulkhead Bulkhead

[ocr errors]
[merged small][merged small][ocr errors][ocr errors][merged small][merged small]

pulverized and sprayed into the furnace. Fig. 3 is a profile and plan of a steamer adapted for carrying oil in bulk, and showing all the storage arrangements for handling liquid fuel. Fig. 4 shows the interior arrangement of the boiler furnace of the steamship "Trocas." A is broken fire-brick resting on the ordinary fire-bars, B is a brick bridge, C a casing of fire-brick intended to protect the riveted seam immediately above it from the direct

[graphic]

Steam

RUSDEN& EELES

No O

Sit

Oil 15

[ocr errors]

BURNERS on

[ocr errors]

B

Steam E

Steam

[ocr errors]

E

[ocr errors]
[ocr errors]

FIG. 9.-Furnace Gear of ss." Murex. "

[ocr errors]
[ocr errors]

2014

[ocr errors]

It

impact of the flame, and D is a lining of fire-brick at the back of the
combustion-box, also intended to protect the plating from the direct
impact of the petroleum flame. The arrangement of the furnace on
the Meyer system is shown in fig. 5, where E is an annular pro-
jection built at the mouth of the furnace, and BB are spiral passages
for heating the air before it passes into the furnace. Fig. 6 shows
the rings CC and details of the casting which forms the projection
or exterior elongation of the furnace. The brickwork arrangement
adopted for the double-ended boilers on the Hamburg-American
Steamship Company's "Ferdinand Laeisz "is represented in fig. 7.
The whole furnace is lined with fire-brick, and the burner is mounted
upon a circular disk plate which covers the mouth of the furnace.
The oil is injected not by steam pulverization, but by pressure due
to a steam-pump. The oil is heated to about 60° C. before entering
the pump, and further heated to 90° C. after leaving the pump.
is then filtered, and passes
to the furnace injector C at
about 30-lb pressure; and
its passage through this in-
jector and the spiral pass-
ages of which it consists
pulverizes the oil into spray,
in which form it readily
ignites on reaching the
interior of the furnace. The
injector is on the Körting
principle, that is, it atomizes
by fracture of the liquid oil
arising from its own mo
mentum under
pressure.

FIG. 10.-Section through Furnace
of ss.
"Murex.'

[ocr errors]

"

The advantage of this
system as compared with
the steam-jet system is the
saving of fresh water, the

abstraction of which is so

injurious to the boiler by the formation of scale.
The general arrangement of the fuel tanks and filling pipes on the
"Murex is shown in fig. 8; and fig. 9 represents the furnace
gear of the same vessel, A being the steam-pipe, B the oil-pipe,
the injector, D the swivel upon which the injector is hung so that
it may be swung clear of the furnace, E the fire-door, and F the
handle for adjusting the injector. In fig. 10, which represents a
section of the furnace, H is a fire-brick pier and K a fire-brick
baffling bridge.

It is found in practice that to leave out the fire-bars ordinarily
used for coal produces a better result with liquid fuel than the
alternative system of keeping them in place and protecting them
by a layer of broken fire-brick.
Boilers fitted upon all the above systems have been run for

thousands of miles without trouble. In new construction it is
desirable to give larger combustion chambers and longer and narrower
boiler tubes than in the case of boilers intended for the combustion
of coal alone.
(F. F. *)
Gascous Fuel.

Strictly speaking, much, and sometimes even most, of the heating effected by solid or liquid fuel is actually performed by the gases given off during the combustion. We speak, however, of gaseous fuel only in those cases where we supply a combustible gas from the outset, or where we produce from ordinary solid (or liquid) fuel in one place a stream of combustible gas which is burned in another place, more or less distant from that where it has been generated.

66

not till 1821 that it was turned. to use at Fredonia, N.Y. In
Pennsylvania natural gas was discovered in 1859, but at first
very little use was made of it. Its industrial employment dates
only from 1874, and became of great importance about ten
years later. Nobody ever doubted that the gas found in these
localities was an accumulation of many ages and that, being
tapped by thousands of bore-holes, it must rapidly come to an
end. This assumption was strengthened by the fact that the
gas-wells," which at first gave out the gas at a pressure of 700
or 800, sometimes even of 1400 lb per sq. in., gradually showed
a more and more diminishing pressure and many of them ceased
to work altogether. About the year 1890 the belief was fairly
general that the stock of natural gas would soon be entirely
exhausted. Indeed, the value of the annual production of natural
gas in the United States, computed as its equivalent of coal,
was then estimated at twenty-one million dollars, in 1895 at
twelve millions, in 1899 at eleven and a half millions. But the
output rose again to a value of twenty-seven millions in 1901,
and to fifty million dollars in 1907. Mostly the gas, derived
from upwards of 10,000 gas-wells, is now artificially compressed
to a pressure of 300 or 400 lb per sq. in. by means of steam-
power or gas motors, fed by the gas itself, and is conveyed over
great distances in iron pipes, from 9 or 10 to 36 in. in diameter.
In 1904 nearly 30,000 m. of pipe lines were in operation. In
1907 the quantity of natural gas consumed in the United States
(nearly half of which was in Pennsylvania) was 400,000 million
Canada (Ontario) also produces
cub. ft., or nearly 3 cub. m.
some natural gas, reaching a maximum of about $746,000 in

1907.

The principal constituent of natural gas is always methane, CH4, of which it contains from 68.4 to 94.0% by volume. Those gases which contain less methane contain all the more hydrogen, viz. 2.9 to 29.8%. There is also some ethylene, ethane and The quantity carbon monoxide, rarely exceeding 2 or 3%. of incombustible gases-oxygen, carbon dioxide, nitrogenranges from mere traces to about 5%. The density is from 0.45 to 0.55. The heating power of 1000 cub. ft. of natural gas is equal to from 80 to 120 lb, on the average 100 lb, of good coal, but it is really worth much more than this proportion would indicate, as it burns completely, without smoke or ashes, and without requiring any manual labour. It is employed for all domestic and for most industrial purposes.

The origin of natural gas is not properly understood, even now. The most natural assumption is, of course, that its formation is connected with that of the petroleum always found in the same neighbourhood, the latter principally consisting of the higher-boiling aliphatic hydrocarbons of the methane series. But whence do they both come? Some bring them into connexion with the formation of coal, others with the decomposition of animal remains; others with that of diatomaceae, &c., and even an inorganic origin of both petroleum and natural gas has been assumed by chemists of the rank of D. I. Mendeléeff and

The various descriptions of gaseous fuel employed in practice H. Moissan. may be classified under the following heads:

I. Natural Gas.

II. Combustible Gases obtained as by-products, in various technical operations.

III. Coal Gas (Illuminating Gas).

II. Gases obtained as By-products.-There are two important cases in which gaseous by-products are utilized as fuel; both are intimately connected with the manufacture of iron, but in a very different way, and the gases are of very different

IV. Combustible Gases obtained by the partial combustion of composition. coal, &c.

(a) Blast-furnace Gases.-The gases issuing from the mouths
of blast-furnaces (see IRON AND STEEL) were first utilized in
1837 by Faber du Faur, at Wasseralfingen. Their use became
more extensive after 1860, and practically universal after 1870.
The volume of gas given off per ton of iron made is about 158,000
cub. ft. Its percentage composition by volume is:
Carbon monoxide
Hydrogen

. 21.6 to 29.0, mostly about 26 %
6.3.
"

I. Natural Gas.-From time immemorial it has been known that in some parts of the Caucasus and of China large quantities of gases issue from the soil, sometimes under water, which can be lighted and burn with a luminous flame. The eternal fires" of Baku belong to this class. In coal-mines frequently similar streams of gas issue from the coal; these are called "blowers," and when they are of somewhat regular occurrence are sometimes conducted away in pipes and used for underground lighting. As a regular source of heating power, however, natural gas is employed only in some parts of the United States, especially in Pennsylvania, Kansas, Ohio and West Virginia, where it always occurs in the neighbourhood of coal and petroleum fields. The first public mention of it was made in 1775, but it was There is always a large amount of mechanically suspended

Methane

Carbon dioxide
Nitrogen
Steam

"

1-8

". 3

[ocr errors]

0.8, ".

[blocks in formation]
[merged small][merged small][merged small][merged small][merged small][merged small][merged small][merged small][ocr errors][merged small][merged small][merged small][merged small]

flue-dust in this gas. It is practically equal to a poor producergas (see below), and is everywhere used, first for heating the blast in Cowper stoves or similar apparatus, and secondly for raising all the steam required for the operation of the blast-furnace, that is, for driving the blowing-engines, hoisting the materials, &c. Where the iron ore is roasted previously to being fed into the furnace, this can also be done by this gas, but in some cases the waste in using it is so great that there is not enough left for the last purpose. The calorific power or this gas per cubic foot is from 80 to 120 B.Th.U.

Since about 1900 a great advance has been made in this field. Instead of burning the blast-furnace gas under steam boilers and employing the steam for producing mechanical energy, the gas is directly burned in gas-motors on the explosion principle. Thus upwards of three times the mechanical energy is obtained in comparison with the indirect way through the steam boiler. After all the power required for the operations of the blastfurnace has been supplied, there is a surplus of from 10 to 20 h.p. for each ton of pig-iron made, which may be applied to any other purpose.

Constituents.

Hydrogen, H,

it is obtained by heating bituminous coal in fireclay retorts and purifying the products of this destructive distillation by cooling, washing and other operations. The residual gas, the ordinary composition of which is given in the table below, amounts to about 10,000 cub. ft. for a ton of coal, and represents about 21% of its original heating value, 56.5% being left in the coke, 5.5% in the tar and 17% being lost. As we must deduct from the coke that quantity which is required for the heating of the retorts, and which, even when good gas producers are employed, amounts to 12% of the weight of the coal, or 10% of its heat value, the total loss of heat rises to 27%. Taking, further, into account the cost of labour, the wear and tear, and the capital interest on the plant, coal gas must always be an expensive fuel in comparison with coal itself, and cannot be thought of as a general substitute for the latter. But in many cases the greater expense of the coal gas is more than compensated by its easy distribution, the facility and cleanliness of its application, the general freedom from the mechanical loss, unavoidable in the case of coal fires, the prevention of black smoke and so forth. The following table shows the average composition of coal gas by volume and weight, together with the heat developed by its single constituents, the latter being expressed in kilogramcalories per cub, metre (0.252 kilogram-calories = 1 British heat unit; 1 cub. metre=35.3 cub. ft; therefore o.1123 calories per cub. metre-1 British heat unit per cub. foot).

[blocks in formation]

Methane, CH,

[blocks in formation]

Carbon monoxide, CO

[blocks in formation]

Benzene vapour, C.H

5.1

[blocks in formation]

33,815

[blocks in formation]

Ethylene, CH

[blocks in formation]

13,960

Carbon dioxide, Co2 ·
Nitrogen, N2
Total

[blocks in formation]
[blocks in formation]

(b) Coke-oven Gases.-Where the coking of coal is performed in the old beehive ovens or similar apparatus the gas issuing at the mouth of the ovens is lost. The attempts at utilizing the gases in such cases have not been very successful. It is quite different where coke is manufactured in the same way as illuminating gas, viz. by the destructive distillation of coal in closed apparatus (retorts), heated from the outside. This industry, which is described in detail in G. Lunge's Coal-Tar and Ammonia (4th ed., 1909), originated in France, but has spread far more in Germany, where more than half of the coke produced is made by it; in the United Kingdom and the United States its progress has been much slower, but there also it has long been recognized as the only proper method. The output of coke is increased by about 15% in comparison with the beehive ovens, as the heat required for the process of distillation is not produced by burning part of the coal itself (as in the beehive ovens), but by burning part of the gas. The quality of the coke for ironmaking is quite as good as that of beehive coke, although it differs from it in appearance. Moreover, the gases can be made to yield their ammonia, their tar, and even their benzene vapours, the value of which products sometimes exceeds that of the coke itself. And after all this there is still an excess of gas available for any other purpose.

[blocks in formation]

One cubic metre of such gas weighs 568 grammes. Rich gas, or gas made by the destructive distillation of certain bituminous schists, of oil, &c., contains much more of the heavy hydrocarbons, and its heat-value is therefore much higher than the above. The carburetted water gas, very generally made in America, and sometimes employed in England for mixing with coal gas, is of varying composition; its heat-value is generally rather less than that of coal gas (see below).

IV. Combustible Gases produced by the Partial Combustion of Coal, &c.-These form by far the most important kind of gaseous fuel. When coal is submitted to destructive distillation to produce the illuminating gas described in the preceding paragraph, only a comparatively small proportion of the heating value of the coal (say, a sixth or at most a fifth part) is obtained in the shape of gaseous fuel, by far the greater proportion remain

As the principle of distilling the coal is just the same, whether the object is the manufacture of coal gas proper or of coke as the main product, although there is much difference in the details of the manufacture, it follows that the quality of the gas is very similar in both cases, so far as its heating value is concerned. Of course this heating value is less where the benzene has beening behind in the shape of coke. extracted from coke-oven gas, since this compound is the richest heat-producer in the gas. This is, however, of minor importance in the present case, as there is only about 1% benzene in these gases.

The composition of coke-oven gases, after the extraction of the ammonia and tar, is about 53% hydrogen, 36% methane, 5% carbon monoxide, 2% ethylene and benzene, 0.5% sulphuretted hydrogen, 1.5% carbon dioxide, 1% nitrogen.

III. Coal Gas (Illuminating Gas).-Although ordinary coal gas is primarily manufactured for illuminating purposes, it is also extensively used for cooking, frequently also for heating domestic rooms, baths, &c., and to some extent also for industrial operations on a small scale, where cleanliness and exact regulation of the work are of particular importance. In chemical laboratories it is preferred to every other kind of fuel wherever it is available. The manufacture of coal gas being described elsewhere in this work (see GAS, § Manufacture), we need here only point out that

An entirely different class of gaseous fuels comprises those produced by the incomplete combustion of the total carbon contained in the raw material, where the result is a mixture of gases which, being capable of combining with more oxygen, can be burnt and employed for heating purposes. Apart from some descriptions of waste gases belonging to this class (of which the most notable are those from blast-furnaces), we must distinguish two ways of producing such gaseous fuels entirely different in principle, though sometimes combined in one operation. The incomplete combustion of carbon may be brought about by means of atmospheric oxygen, by means of water, or by a simultaneous combination of these two actions. In the first case the chemical reaction is

[blocks in formation]
« ՆախորդըՇարունակել »