 | 1963 - 1044 էջ
...strength of the safety belt be less than that corresponding with the ultimate load factors specified taking due account of the dimensional characteristics...that corresponding with the ultimate load factors specified. (See § 6.260.) Angle above or below horizontal plane Effective intensity (candles) 0°to... | |
 | 1970 - 630 էջ
...ultimate load factors specified in the current applicable aircraft airworthiness requirements considering the dimensional characteristics of the safety belt...installation for the specific seat or berth arrangement. The webbing of each safety belt shall be replaced as required by the Administrator. (c) Visual flight... | |
 | 1989 - 826 էջ
...ultimate load factors specified in the current applicable aircraft airworthiness requirements considering the dimensional characteristics of the safety belt installation for the specific seat or berth Federal Aviation Administration, DOT arrangement. The webbing of each safety belt shall be replaced... | |
 | 1979 - 1200 էջ
...specific seat or berth arrangement. (b) Each belt must be attached so that no part of its anchorage can fail at a load lower than that corresponding with the ultimate load factors specified in § 27.561(b). (c) Each safety belt must be equipped with a metal to metal latchIng device.... | |
 | 1975 - 734 էջ
...specific seat or berth arrangement. (b) Each belt must be attached so that no part of its anchorage can fail at a load lower than that corresponding with the ultimate load factors specified in i 27.561 (b). §27.1415 Ditching equipment. (a) Emergency flotation and signaling equipment... | |
 | 1977 - 788 էջ
...seat or berth arrangement. (b) Each belt must be attached so that no part of its anchorage can fall at a. load lower than that corresponding with the ultimate load factors specified in f 27.561 (b). §27.1415 Dili-hint; equipment, (a) Emergency flotation and signaling equipment... | |
 | 1957 - 1118 էջ
...factors specified in the pertinent currently effective aircraft airworthiness parts of this subchapter, taking due account of the dimensional characteristics...installation for the specific seat or berth arrangement. The webbing of safety belts shall be subject to periodic replacement as prescribed by the Administrator.... | |
 | United States. Flight Standards Service - 1962 - 170 էջ
...installation — Safety belts. — Safety belts should be so attached that no part of the anchorage will fair at a load lower than that corresponding with the ultimate load factors equal to those specified in Chap. 1, multiplied, by a factor of 1.33. ELECTRICAL EQUIPMENT INSTALLATION Electrical equipment, if... | |
 | 1964 - 672 էջ
...the pertinent currently effective aircraft airworthiness parts of the regulations in this subchapter, taking due account of the dimensional characteristics...installation for the specific seat or berth arrangement. The webbing of safety belts shall be subject to periodic replacement as prescribed by the Administrator.... | |
 | 1964 - 1108 էջ
...safety belt be less than that corresponding with the ultimate load factoni specified in §4b.260(a), taking due account of the dimensional characteristics of the safety belt installation for thtj specific seat or berth arrangement Safety belts shall be attached so that no part of the anchorage... | |
| |
... considering the dimensional characteristics of the safety belt installation for the specific seat or berth arrangement. The webbing of each safety belt shall be replaced as required by the Administrator. 
