A pull must be required to obtain and maintain speeds below the specified trim speed, and a push must be required to obtain and maintain speeds above the specified trim speed. This must be shown at any speed that can be obtained except... Basic Glider Criteria Handbook - Էջ 123United States. Flight Standards Service - 1962 - 139 էջԱմբողջությամբ դիտվող - Այս գրքի մասին
| 1939 - 1520 էջ
...elevator control forces and the friction within the control system shall be such that: (a) A pull shall be required to obtain and maintain speeds below the specified trim speed and a push to obtain and maintain speeds above the specified trim speed. This shall be so at any speed which can... | |
| 1981 - 890 էջ
...elevator control forces and the friction within the control system must be as follows: (a) A pull must be required to obtain and maintain speeds below the...maintain speeds above the specified trim speed. This must be shown at any speed that can be obtained, except that speeds requiring a control force in excess... | |
| 1999 - 1064 էջ
...characteristics of the elevator control forces (including friction) must be as follows: (a) A pull must be required to obtain and maintain speeds below the specified trim speed, and a push must be required to obtain and maintain speeds above the specified trim speed. This must be shown at... | |
| 1999 - 1064 էջ
...characteristics of the elevator control forces (including friction) must be as follows: (a) A pull must be required to obtain and maintain speeds below the specified trim speed, and a push must be required to obtain and maintain speeds above the specified trim speed. This must be shown at... | |
| 1965 - 480 էջ
...elevator control surface, it must also be shown that upward displacement of the elevator trailing edge is required to obtain and maintain speeds below the specified trim speed, and a downward displacement of the elevator trailing edge is required to obtain and maintain speeds above... | |
| 1965 - 1938 էջ
...elevator control surface, it must also be shown that upward displacement of the elevator trailing edge is required to obtain and maintain speeds below the specified trim speed, and a downward displacement of the elevator trailing edge is required to obtain and maintain speeds above... | |
| 1964 - 918 էջ
...control surface it shall also be shown that an upward displacement of the elevator trailing edge is required to obtain and maintain speeds below the specified trim speed and a downward displacement of the elevator trailing edge is required to obtain and maintain speeds above... | |
| 1957 - 1296 էջ
...throttle and collective pitch settings, a rearward displacement of longitudinal control shall be necessary to obtain and maintain speeds below the specified trim speed, and a forward displacement shall be necessary to obtain and maintain speeds above the specified trim speed... | |
| United States. Flight Standards Service - 1971 - 210 էջ
...characteristics of the elevator control forces (including friction) must be as follows: (a) A pull force must be required to obtain and maintain speeds below the specified trim speed, and a push force must be required to obtain and maintain speeds above the specified trim speed. This must be shown... | |
| 1962 - 898 էջ
...characteristics of the elevator control forces and friction shall comply with the following: (a) A pull shall be required to obtain and maintain speeds below the specified trim speed, and a push shall be required to obtain and maintain speeds above the specified trim speed. This criterion shall... | |
| |